Drennan Acolyte Margin Carp Pole 9.5m, this new pole is slim, stiff, light and very strong. It has been designed for bagging up on modern commercial fisheries. The pole doesn't need to be cut back as its already fitted with a Drennan 5.4mm bush. It has been designed to be used with thick hollow elastics up to size 20. The top kits are shorter than normal top kits, which is perfect for margin fishing, these top kits are 2.33m long, the Acolyte and Acolyte Carp top kits are longer at 2.89m. The shorter length of elastic you in these top kits give you more control over big fish, especially in snaggy swims.
One of the supplied top kits is painted white and called a ghost tip, this makes the pole less visible to wary big carp when they swim near the pole tip, the theory behind this is that fish can't see a heron when they look up as they are the same colour as the sky when viewed from below.
The basic package comes with a total of 2 margin kits and 1 ghost margin kit, a total of 3 kits, more kits are available at a very reasonable price. Each power kit comes with factory fitted side pull ptfe slots as standard and roller cones to give a really smooth elastic when under pressure.
The pole also comes with two Skid Bungs, six 5.4mm Super Slick PTFE Bushes, six intermediate PTFE Bushes, three Roller Cones, an extractor rod, nine Side Pull Beads, an EVA nose cone for the No3 section, a Cupping Kit Adapter and a Polemaster Pole Pot. The cupping kit adapter is supplied in case you wish to change one of the power kits into cupping kit and means all your power kits and your cupping kit is the same length so that you can cup your bait in accurately.
The Acolyte Margin Carp pole is made on the same mandrel as the Acolyte carp pole so that the top seven sections of both poles will interchange, this gives you reasonably priced back up pole if you already own a Acolyte Carp pole. The sections from this pole must not be interchanged with the Acolyte Match pole as you will snap the sections either side.
The full package contains
9.5m pole including mini extension and Margin Kit
1x extra Margin Kit
1x extra Ghost Margin Kit
2x Skid Bungs
6x PTFE Bushes
6x Intermediate PTFE Bushes
3x Roller Cones
9x Side Pull Beads
EVA nose cone
Extractor rod
Cupping kit adaptor
Polemaster Pole Pot
Wipe-clean nylon bag
Manufacturer Part Number | margacol |
---|---|
Manufacturer | Drennan |