Trakker SuperDome Extended Bivvy Wrap

The Superdome Bivvy Extended Wrap is a dedicated overwrap which traps a layer of air around the shelter, aiding in elimination condensation and increasing heat retention when using the Superdome Bivvy. It can be easily fitted to the bivvy by a lone angler, in much the same way that you would put an overwrap on any Armo or SLX-style pram hood bivvy.

Due to the large peak of the Superdome Bivvy, using the Extended Wrap creates a large porch area of approx 50cm in depth, which is can be used as additional storage space for things like waders, dirty boots, bait buckets, etc.

The Extended Wrap features corresponding front and rear doors – allowing for total through-access. As with the Superdome Bivvy itself, both of the doors are fitted with large insect panels which can be covered with clear window panels when wanting to keep an eye on the water during periods of bad weather. The supplied large clear window can be fitted to the front door window, whilst an standard-sized Clear Window is available as an optional extra to cover the insect panel in the back door. Large insect panels can also be revealed to correspond with those either-side of the Superdome’s front door, allowing for exceptional airflow, ventilation and light ingress when required.

Product Features;

Transforms Superdome Bivvy into a twin-skin (or triple-skin with inner compartments in place) shelter

Reduces condensation and increases heat retention

Creates approx 0.5m porch area in front of bivvy

Total through access; door at front and back

Dual-zipped doors, allowing you to create a letterbox opening

Huge mozzie vents in front plus window in back door providing free airflow ventilation

Dual rod straps at front and rear of bivvy

Heavy-duty T-pegs

Zipped carrybag

Superdome Bivvy Extended Wrap Assembly Instructions;

1. Erect your Superdome in the normal manner. Take your wrap from its bag and unfold it carefully.

2. Cover the bivvy with the wrap, starting by pulling the back of the wrap over the front of the bivvy. If it is windy, it may help to pull the wrap towards the direction of the wind.

3. Peg out the two rear pegging points either side of the rear door and then the two front pegging points, either side of the front door. It helps if the door is in a closed position while you peg these points out.

4. Now peg out the rest of the winter wrap. If the wrap does not look fully tensioned, you can re-adjust any of the pegging points. Please note: Condensation may still form in the single skin porch area.

Disassembly;

To disassemble the wrap, simply reverse the instructions above.

Dimensions: (W) 380cm x (D) 430cm x (H) 195cm

Weight: 5.6kg (plus pegs totalling approx. 1.2kg)

Wrap Only, Trakker Superdome Bivvy and Inner Capsules not include but available separately.

Trakker SuperDome Extended Bivvy Wrap